Abstract
Pulsed electrodeposition of nanocatalysts from aqueous electrolyte solutions has received considerable attention on account of its ease of use, relative low cost, reproducibility, and access to several process parameters, compared with other widely used techniques. It is, therefore, desirable to determine the influence of different operating parameters to optimize the electrodeposition process. A detailed mathematical model, which includes the effects of ionic migration, was developed to accurately predict the influence of various electrodeposition parameters on the resulting electrodeposited layers in terms of size, distribution and catalytic activity. Most of the available models for pulsed electrodeposition are restricted to conventional square pulses and ignore contributions from the growth current during nucleation. The model presented here is based on progressive nucleation and takes into account contributions from both nucleation and growth currents. Furthermore, the model considers all contributing factors towards growth current, including diffusion, ohmic and charge transfer phenomena. Lastly, unlike many models that are restricted to a constant diffusion coefficient for a given species, the presented model is based on a system with varying diffusion coefficients for all active species in the electrolyte. Nanocatalysts, including platinum, nickel, copper, and cobalt, were electrodeposited on different substrates employing a pulsed current electrodeposition (PCE) technique. Pulses with low duty cycle, high peak deposition current densities, and delivered in milli- and nano-second range utilizing square, triangular, and ramp-down waveforms were used. The presence of nanocatalysts, ranging from 2-50 nm in diameter, was confirmed by SEM and XRD. Additional electrochemical characterization techniques were also employed. According to the model, at high peak deposition current densities and low duty cycles, ramp-down waveform yields the highest nucleation rate, confirming the experimental findings in which nanoparticles generated with the above waveform produces the smallest average grain size, ranging from 2 to 10 nanometer in diameter for platinum nanocatalysts on carbon cloths and 5 to 50 nm in diameter for nickel and copper nanoparticles deposited on titania nanotubes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.