A magnetic solid phase extraction microfluidic chip coupled with gas chromatography-mass spectrometry for the determination of polycyclic aromatic hydrocarbons in aqueous samples

Abstract

In this paper, we designed and manufactured a reliable magnetic solid phase extraction (MSPE) microfluidic chip for determination of polycyclic aromatic hydrocarbons (PAHs) in water combined with gas chromatography-mass spectrometry. Sample loading, washing and elution are implemented with microinjection pump and integrated on a single chip, which reduced manual operation. Magnets were used to fix octadecyl/phenyl bifunctional Fe3O4@SiO2 extractant to avoid the design of weir structure in extraction chamber. The whole microfluidic chip was simple and low cost. Based on the microfluidic chip extraction platform, the on-chip MSPE method for the determination of PAHs was optimized and established. The results showed that this method required only 2 mL of sample, 2 mg of extractant, and 50 μL of elution organic solvent for whole on-chip MSPE process, which was environmentally friendly and consistent with green chemistry. Method verification results were displayed which the linear range of five PAHs was between 1-100 ng/mL with good linearity (R2≥ 0.9985), and the detection limits (S/N = 3) were 0.08–0.26 ng/mL. The RSDs of intra-day precision (n=6) and inter-day precision (n=9) for PAHs were less than 6.1 % and 7.2 %, respectively. Enrichment factors were determined to be 31.3–37.7. The recoveries of river water, tap water, bottle water, waste water and urine at three spiked levels were in the range of 89.9% to 113.7% and the matrix effect values were between 83.8% to 109.6%. The extraction platform has the advantages of accurate analysis, simple design and cost-effective, which is conducive to the widespread use of microfluidic chips