Abstract
Abstract A magnetic microelectromechanical systems (MEMS) actuator using a small permanent neodymium-magnet surrounded by magnetic fluid (MF) was developed and characterized. The magnet is enclosed in a cavity sandwiched by two identical thin PET-sheet diaphragms and is able to move smoothly due to the MF. The diaphragms deflect when an external magnetic force is applied to the magnet. This structure was adopted to prevent the diaphragms from being stiffened by attaching or fabricating a magnetic layer on the diaphragm surface and to secure the necessary volume of magnetic material. The magnets are 2–4 mm in diameter and the cavity is 5 mm in diameter and 1 mm in depth. The diaphragms are 20 μm in thickness. Experiments showed the displacement amplitude generated at the diaphragm center was in the range of 10–50 μm for attractive and repulsive magnetic force when magnetic flux density of 4–30 mT was applied. The response was within about 1 s. The deflection profile of the diaphragms can also be varied by changing the magnet position.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
