Abstract
A machine has been developed for studying the static and dynamic triaxial constitutive behavior of large specimens of geologic and construction materials. Test specimens can also contain a cylindrical tunnel cavity to permit study of tunnel-reinforcement structures and rock-structure interaction. The specimens are 0.3 m in diameter and 0.3 to 0.45 m high; the model tunnels can be up to 50 mm in diameter. Static and dynamic triaxial loads can be applied with maximum pressures of 200 MPa in static tests and 100 MPa in dynamic tests. Dynamic loading can also be superimposed on a static preload as large as 20 MPa. To facilitate study of tunnel reinforcement, the tunnel is maintained at ambient pressure, with access at both ends for instrumentation and photography. Example results show the influence on tunnel deformation of loading rate as well as the presence of joints and their orientation. For a given allowable tunnel closure, substantially greater pressures can be sustained under dynamic loading than under static loading, and substantially greater pressures can be sustained by an intact specimen than by a jointed specimen.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
