Abstract
In this paper we will present a low-phase-noise wide-tuning-range oscillator suitable for scaled CMOS processes. It switches between the two resonant modes of a high-order LC resonator that consists of two identical LC tanks coupled by capacitor and transformer. The mode switching method does not add lossy switches to the resonator and thus doubles frequency tuning range without degrading phase noise performance. Moreover, the coupled resonator leads to 3 dB lower phase noise than a single LC tank, which provides a way of achieving low phase noise in scaled CMOS process. Finally, the novel way of using inductive and capacitive coupling jointly decouples frequency separation and tank impedances of the two resonant modes, and makes it possible to achieve balanced performance. The proposed structure is verified by a prototype in a low power 65 nm CMOS process, which covers all cellular bands with a continuous tuning range of 2.5-5.6 GHz and meets all stringent phase noise specifications of cellular standards. It uses a 0.6 V power supply and achieves excellent phase noise figure-of-merit (FoM) of 192.5 dB at 3.7 GHz and >; 188 dB across the entire tuning range. This demonstrates the possibility of achieving low phase noise and wide tuning range at the same time in scaled CMOS processes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.