Abstract
This paper presents the design and analysis of a global system for mobile communication applications, as well as the design and analysis of a compact, bidirectional Electrically Small Antenna (ESA) at 0.9 GHz for Radio Frequency Identification (RFID) applications. In order to attain results at lower frequencies while keeping a compact size, the proposed design consists of a microstrip patch antenna in which an SRR and a semicircular-shaped SRR were subtracted from the ground plane. The dimensions of the FR4 substrate, on which this ESA was designed, were 20 × 18 × 1.6 mm. Ansys HFSS was used for the design and simulation of the antenna. Chemical etching was implemented to fabricate the ESA and MS2037C Anritsu Combinational Analyzer was applied for testing. The simulated results show that at 0.9 GHz, the ESA achieves a bandwidth of 300 MHz (700 MHz-1000 MHz). At the resonance frequency, a bidirectional radiation pattern with a 80% radiation efficiency is obtained in both H and E planes. A 90% agreement between the simulated and the fabricated results has been achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Engineering, Technology & Applied Science Research
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.