Abstract
This paper describes a low-noise, 900-MHz, voltage-controlled oscillator (VCO) fabricated in a 0.6-/spl mu/m CMOS technology. The VCO consists of four-stage fully differential delay cells performing full switching. It utilizes dual-delay path techniques to achieve high oscillation frequency and obtain a wide tuning range. The VCO operates at 750 MHz to 1.2 GHz, and the tuning range is as large as 50%. The measured results of the phase noise are -101 dBc/Hz at 100-kHz offset and -117 dBc/Hz at 600-kHz offset from the carrier frequency. This value is comparable to that of LC-based integrated oscillators. The oscillator consumes 10 mA from a 3.0-V power supply. A prototype frequency synthesizer with the VCO is also implemented in the same technology, and the measured phase noise of the synthesizer is -113 dSc/Hz at 100-kHz offset.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
