A low-complexity multi-channel active noise control system using local secondary path estimation and clustered control strategy for vehicle interior engine noise

Abstract

Conventional multi-channel active noise control (ANC) system based on the adaptive notch filtered-x least mean square algorithm is typically used for active control of vehicle interior engine noise with prominent harmonic characteristics. However, due to the large estimated secondary path length and the centralized control strategy, the system has high computational complexity and fragile stability. To alleviate this problem, an efficient multi-channel ANC system using the local secondary path (LSP) estimation and clustered control strategy is proposed in this paper. Based on the modified LSP estimation method, the system may utilize a set of low-order but accurate LSP models to simplify the convolution operations of reference filtering. Besides, the proposed clustered control strategy combines the advantages of centralized and decentralized control strategies, and thus the system not only enjoys good noise attenuation performance and stability, but also its computational burden is further greatly reduced. Numerical simulations are performed to evaluate the noise attenuation performance and frequency mismatch effect of the proposed multi-channel ANC system. In addition, a series of real vehicle ANC experiments are conducted. The results show that, under stationary work conditions, the interior overall, 2nd order, 4th order, 6th order engine noises may be attenuated by 12.91 dB(A), 32.98 dB(A), 15.34 dB(A) and 8.74 dB(A), respectively, and under nonstationary work conditions, the maximum overall noise reductions at the four error microphones may reach 6.40 dB(A), 6.14 dB(A), 12.48 dB(A) and 11.07 dB(A), respectively. This fully confirms the effectiveness of the proposed multi-channel ANC system in real-world applications.