A laboratory study on fracture initiation and propagation of granite under cyclic-injection hydraulic fracturing

Abstract

The abundant geothermal energy in hot dry rock (HDR) geothermal reservoirs is an attractive renewable energy resource with great potential. Cyclic injection in hydraulic fracturing has been proved to be a suitable way for the geothermal energy exploitation. However, the fracture initiation and propagation regimes induced by cyclic injection have been inadequately studied, and the fracturing optimization for HDR is often by experience. For this reason, true tri-axial hydraulic-fracturing tests were conducted to study the initiation and propagation of hydraulic fractures, while the specimens were subjected to the cyclic injection with different cycle time duration and injection rate. The results revealed that the initiation of hydraulic fracture was displayed as three basic patterns, and these fracture-initiation patterns were developed into two fracture geometries: simple fracture with only 2–4 strands and complex fracture network with >4 strands. The main reason for this difference is that the initiation and propagation of hydraulic fracture is controlled by the way of fluid circulation, and the cycle time duration and injection rate each played a different role in hydraulic fracturing. At a low injection rate, the initiation and propagation of hydraulic fractures under the high-frequency cycle (cycle time duration = 10 and 20 s) are mainly controlled by the change of injection pressure. Here, the hydraulic energy mainly acts on the rock near the well. The frequent change of injection pressure promotes the initiation of micro-fractures and forms a complex but short hydraulic fracture network. However, when high injection rate is subjected, too high and too low cycle frequencies (cycle time duration = 5 and 40 s) both tend to form a simple fracture, but the fracture has strong extension ability. With that, the similarity criterion of physical phenomena between the on-site prototype and the experimental model were discussed, and these lab-scale results were translated into the fracturing site of HDR.