Abstract
The aim of this study is to analyze the phase separation that occurs between treated and untreated rubber crumb particles produced by wet processes in the laboratory. The percentage of replacement used for both the treated and untreated crumb rubber-modified asphalt (CRMA) was 5%, 10%, 15%, and 20%. Tests to evaluate binder properties were performed using a rotational viscometer and a DSR, and the following properties were determined—viscosity, G*/sinδ, % recovery, and Jnr. The phase separation study was analyzed using the viscosity and G*/sinδ results. In general, the results of the study show the following. (1) The treated CRMA binders had higher viscosity values than untreated CRMA binders, although some values could not be measured due to the high viscosity values. (2) The G*/sinδ, % recovery and Jnr results also had a similar trend with viscosity results. (3) The viscosity and G*/sinδ phase separation values demonstrate that treated CRMA binders perform better than untreated CRMA binders. (4) Different experimental methods have shown variations in the calculated SI value; hence, a more improved approach should be explored to accurately assess the storage stability of asphalt binders containing various additives.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
