A laboratory fracture shear cell used for simulation of fracture reactivation

Abstract

Fault reactivation is an unfavourable incident during drilling and production that may occur due to changes in situ stresses and reservoir pressure. Only a few studies, in their analyses, have included the effects of fault geometrical properties—these are important parameters controlling fault slippage and damage around it. In this paper, the significant influence of fracture morphology on the mechanical behaviour of rock fractures was investigated through experimental studies of shearing rock fractures in the lab. The experiments carried out using a fracture shear cell (FSC): the cell that was modified by adding a number of components to an existing true triaxial stress cell (TTSC) and designing a duplex high pressure cylinder that is capable of applying large normal stresses to the sample at a constant rate. A number of artificial blocks made of mortar material were subjected to shear tests using FSC under a wide range of normal stresses and at different shearing directions. The outputs of uniaxial compressive strength and fracture shear tests in the lab were used to plot the failure envelope of the fractured rock mass and discuss the failure mechanism through shearing. Accordingly, a calibrated, numerical discrete element method (DEM) was used to simulate the shear behaviour of fractures previously tested in the lab. The results of lab tests and DEM simulations will be presented and different failure mechanisms that are expected during shearing will be explained. The results show the significant influence of surface roughness on shear strength and extent of damage zone along the fracture. It was found that the shearing response of fractures depends on the magnitude of normal stress, which indicates the importance of having a good knowledge of in-situ stresses when modelling fault reactivation and damage near the fault zones. The results of lab experiments and numerical simulations were compared and good agreements were observed.