A kinetics study of microwave pyrolysis of sewage sludge and corn stalk mixture

Abstract

AbstractFast pyrolysis of sewage sludge (SS), corn stalk (CS), and their mixture under both direct and indirect microwave heating was carried out in a prototype microwave thermogravimetric reactor at high heating rates, 179 and 203 K/min, respectively. It was found that the samples could be heated up rapidly by direct microwave heating, while there is a temperature lag of the sample to the heated reactor wall in indirect heating. The Flynn–Wall–Ozawa (FWO) and Kissinger–Akahira–Sunose (KAS) methods were used to analyze the thermogravimetric data of SS, CS, and their mixture under direct microwave heating. When the FWO method was used, the average activation energies of SS, CS, and their mixture were obtained as 6.0, 18.9, and 39.8 kJ/mol, respectively. When the KAS method was used, the average activation energies of CS and mixture were 12.6 and 31.6 kJ/mol, respectively. Those values are much lower than reported under conventional heating, and likely result from the interaction of microwave irradiation and the biomass samples. The reaction kinetics of directly microwave‐heated biomass pyrolysis from this study provide essential data for modelling, scaling, and designing the microwave‐assisted in‐situ catalytic pyrolysis reactors with mixed biomass and catalyst particles.