Abstract

Hemicellulose in the complex structure of lignocellulosic substances is mainly composed of xylan which is a polymer based on monosaccharide xylose. Using acidic or enzymatic hydrolysis, hemicellulose can be depolymerized into its constituent monomer. The kinetics of hemicellulose depolymerization and decomposition in oat hull was investigated under moderate pressures with catalyst (H2SO4) concentration up to 0.55 N and temperatures of up to 130 °C for a total residence time of 150 min. Different trends of recovery or generation and kinetic mechanisms obtained for the components in the hydrolysate which could be described by different kinetic models, that is, a single-phase kinetic mechanism with product decomposition (two-step sequential reaction) could describe xylose generation. However, generation of arabinose, furfural, and acetic acid followed a single-phase mechanism with no decomposition (one-step reaction). Generation of glucose in the hydrolysate followed a biphasic mechanism due to the fast- and slow-releasing fractions into the liquid phase which was apparently with no decomposition. A pentose recovery of almost 80% was achieved under optimal conditions. Parameters of xylitol bioproduction indicated that a xylitol/xylose conversion yield of 0.80 g/g is achievable from the concentrated hydrolysate with no complementary treatment proving its low toxicity compared to other hemicellulose resources.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call