A K-Band Phase-Locked Transmitter-Receiver System for CW Balanced-Bridge Measurements

Abstract

A major sensitivity limitation common to most microwave CW balanced-bridge systems must be attributed to bridge distortion noise, caused by residual FM in the transmitted signal. The described superheterodyne transceiver minimizes this limit for a narrowband K-band bridge system by utilizing precise, coherent IF detection. A phase-locked local oscillator provides means for an arbitrary, stable preselection of the in-phase or quadrature component with the help of a calibrated IF delay line. The transmitter is either 1) frequency-stabilized to a sample cavity by means of a high-gain AFC loop, or 2) phase-locked simultaneously to a K-band harmonic of a VHF quartz oscillator and to a tunable VHF oscillator (VFO). This yields flexibility in a wide range of applications, such as measuring small reflection coefficients, dielectric constants, or magnetic tensor susceptibilities (e. g., in ESR spectroscopy). Analytical expressions for phase and amplitude distortions are derived for a bridge containing one high-Q element. In the systems theory of operation, analytical formulas for the noise spectral densities and the loop errors are given, together with numerical examples. The additional receiver noise, due to residual FM and increased bridge power, is demonstrated by means of measured IF-noise spectra. A cavity-Q measurement with ±1 percent accuracy, using 5-?W incident bridge power, proves the system's capability for measurements of small reflection coefficients.