A Hydraulic Evapotranspiration Multisensor

Abstract

An exclusively mechanical stand-alone automatic device, self-adjusting to weather changes for controlled irrigation, that operates only on the energy of piped water, without electricity, is the described low-cost “Hydraulic Evapotranspiration Multisensor-HEM”. It is composed of an Evaporation Pan with water left to evaporate, a Floater with a Magnet floating in this water, a Hydraulic Device managing a Hydraulic Water Valve having means to adjust irrigation frequency, and a system that returns water to said Pan, through an Adjustable Dripper, to replace that lost by evaporation. During the Evaporation Phase, gradually the water level is lowered to a predetermined level, at which the floating Magnet acts on said Hydraulic Device to start irrigation. Water from the irrigation line is returned to the Evaporation Pan at the proper for the irrigation time rate. When the lost water is replaced irrigation is terminated and the system resets. On installation Irrigation Frequency and Irrigation Time are set with two graduated screws, for normal weather and the conditions of the particular plantation. HEM responding to weather changes modifies the irrigation schedule set, either by shortening, at a high evaporation rate, the time interval between consecutive irrigation cycles to protect plantations from water deficit stress or extending this time interval at a low evaporation rate to save water. Assessing the performance of HEM, by taking the estimations of evapotranspiration from the Penman–Monteith method shows high accuracy in the studied site. Considering the advantages of the product against the programmable irrigation controller devices, HEM provides optimum irrigation control in field crops and makes it a powerful “green tool” to be used in Mediterranean greenhouses.