Abstract
This work investigates the application of a hybrid system that combines forward osmosis (FO) and reverse osmosis (RO) processes for the supply of a fertilizing solution that could be used directly for irrigation purposes. In the FO process the feed solution is treated sewage effluent (TSE) and two different types of draw solutions were investigated. The impact of the feed solution and the draw solution flowrates and the membrane orientation on the membrane flux were investigated in the forward osmosis process. RO was used for the regeneration of the draw solution. In the forward osmosis process it was found that the highest membrane flux was 13.2 LMH. The FO process had high rejection rates for total phosphorus and ammonium which were 99% and 97%, respectively. RO achieved 99% total salts rejection rate. Seawater RO (SW30HR) and brackish water RO (BW30LE) membranes were used for the regeneration of the draw solution. The specific power consumption for the regeneration of the draw solution was 2.58 kW h/m3 and 2.18 kW h/m3 for SW30HR and BW30LE membranes, respectively. The final product water had high quality in terms of total dissolved solids concentration but the concentration of phosphorus was slightly higher than recommended due to adding 0.1 M of diammonium phosphate in the draw solution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.