A high-Q broad-band active inductor and its application to a low-loss analog phase shifter

Abstract

The proposed high-Q broad-band active inductor utilizes frequency-insensitive negative resistance to compensate constant internal losses caused by the drain-to-source conductance of the field-effect transistors (FETs), the dc bias circuit, and several other factors. The measured frequency range of the fabricated InAlAs/InGaAs/InP HEMT active inductor is 6 to 20 GHz for Q values greater than 100, and 7 to 15 GHz for Q values greater than 1000. A low-loss analog phase shifter is also fabricated at C-band. This is constructed with the active inductors, the varactor diodes and the low-loss multilayer broad-side coupler in a MIC structure. Since the constant negative resistance of the active inductors also compensates the line loss of the coupler and the varactor diodes' series resistance, the measured results show a good insertion loss performance with a large phase shift. A phase shift of more than 225/spl deg/ within a 0.8 dB insertion loss from 4.7 to 6.7 GHz, another of more than 180/spl deg/ within 1.3 dB insertion loss from 3.7 to 8.5 GHz, and one more of more than 90/spl deg/ within 1.4 dB insertion loss from 3.5 to 10.6 GHz were obtained.