Abstract
A three-stage Doherty power amplifier (DPA) with a flat gain is represented. The driving amplifier at an input of peaking cells is used to achieve high efficiency and flat gain to control the input power level of peaking cells. For the experimental validation, the proposed DPA is implemented using a GaN HEMT and Si LDMOSFETs. For a continuous wave signal, power-added efficiencies of 34.0% and 39.3% are obtained at 8.5-dB back-off power (BOP) and 4.0-dB BOP from the saturation output power, respectively. The measured one-carrier wideband code division multiple access results show high efficiency and flat gain characteristics above 10 dB over the entire output power range.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
