Abstract

AbstractA high‐efficiency power management unit (PMU) with wide dynamic range for radio frequency (RF) energy harvesting system is proposed in this paper. A digital zero current switching (ZCS) and a digital maximum power point tracking (MPPT) circuits are adopted. A sub‐threshold current reference circuit and a subthreshold voltage detection circuit are proposed to reduce the power consumption of always‐on control circuits and improve the conversion efficiency at low input power. A dual‐oscillator is designed to extend the frequency range and widen the input power range with optimized power consumption under low‐end band and high‐end band, respectively. Switch size and on‐time are adjusted according to the input power, which optimizes the conversion efficiency in a wide power range. Proposed PMU is implemented in a standard 180 nm CMOS process. The post‐layout simulation results show that proposed PMU can achieve cold‐start at the input voltage of 280 mV, the power consumption to maintain the PMU is only 9.6 nW. The input power range of the PMU is 11 nW–677 μW. When the input power is 50 nW, a power conversion efficiency (PCE) of 65% is achieved, and the peak PCE can reach 93% at 23.5 μW.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call