A high-strength, environmental-friendly, and multifunctional soy protein adhesive inspired by biomineralization

Abstract

Soy protein is an economical and eco-friendly adhesive material that offers significant potential for the development of bio-based adhesives. However, they have poor water resistance, low bonding strength, mold-susceptibility, and deterioration, which are serious challenges to the widespread application of soy protein adhesives in plywood. This work was inspired by the biomineralization phenomenon and the preparation of a novel soy protein adhesive (SPI-RGT-AgNPs). The SPI-RGT-AgNPs adhesive exhibited excellent viscosity, residual rate, and moisture absorption performance compared with the original soy protein isolate (SPI) adhesive, with an increase from 37° (SPI) to 81° (SPI-10RGT-10AgNPs) in water contact angle testing. The dry and wet adhesion strengths reached 2.49MPa and 1.43MPa, 193% and 117% higher than SPI adhesive, respectively. Molecular docking simulations were used to verify that the introduction of modifiers significantly improved the stability and crosslinking strength of the adhesive. The best ratio of the SPI-RGT-AgNP adhesive was confirmed using the response surface methodology (RSM). Simultaneously, SPI-RGT-AgNPs adhesive also showed excellent anti-mildew and anti-microbial efficiencies to Escherichia coli (98.18%) and Staphylococcus aureus (99.33%). In addition, a life-cycle assessment was used to explore the pollution emissions from the adhesives. As compared to formaldehyde-based adhesives, the SPI-RGT-AgNP adhesive had lower energy consumption and pollution emissions. Therefore, this study prepared a novel high-strength and multifunctional soy protein adhesive, guiding the production of multifunctional and green adhesives.