Abstract
This article presents a high precision, wide dynamic range (DR) closed-loop neuromodulation (CLNM) system that can completely reject stimulation artifacts (SA) and achieve rapid SA recovery. In the recorder, a novel SA quick-blanking scheme is proposed for rail-to-rail SA rejection while minimizing SA recovery time. Besides, a new analog front-end (AFE) architecture based on a frequency-shaping (FS) technique is developed to extend DR intrinsically. In the stimulator, a stimulation driver implemented with a proposed redundant crossfire (RXF) technique is incorporated to improve the effective resolution of the stimulation current. The designed CLNM system is implemented in a 180 nm Bipolar-CMOS-DMOS (BCD) process. Measurement results show that the system is capable of tolerating rail-to-rail (5 V) SA and reducing the SA recovery time from 12 ms to 0.15 ms. The FS recorder extends the DR at low frequencies (LF) to 17.5 bits to enhance tolerance to LF interferences. The proposed stimulator adopting the 4-way RXF topology improves the effective resolution to 12.75 bits without consuming much extra area and power. Animal experiments demonstrate that the designed system can acquire high-fidelity neural signals immediately after stimulation onsets, thus supporting concurrent recording and stimulation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Biomedical Circuits and Systems
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.