Abstract
Ca-loaded activated carbon is developed as fuel for direct carbon solid oxide fuel cells (DC-SOFCs), operating without any carrier gas and liquid medium. Ca is loaded on activated carbon through impregnation technique in the form of CaO, which exhibits excellent catalytic activity and significantly promotes the output performance of DC-SOFCs. DC-SOFCs fueled by activated carbon with different Ca loading content (0, 1, 3, 5 and 7 wt. %) are tested and the performances are compared with the DC-SOFC running on the conventional Fe-loaded activated carbon. It is found that the performance of the DC-SOFC with 5 wt. % (373 mW cm−2) and 7 wt. % (378 mW cm−2) Ca-loaded activated carbon is significantly higher than that of the cells operated on 5 wt. % Fe-loaded activated carbon, 1 wt. % and 3 wt. % Ca-loaded activated carbon. The discharging time and fuel utilization of the DC-SOFC with 5 wt. % Ca-loaded activated carbon are also the optimal ones among all the cells. The microstructure, element distribution and carbon conversion rate of the Ca-loaded carbon, the impedance spectra of the corresponding DC-SOFCs are measured. The reasons for the reduced fuel utilization of 7 wt. % Ca-loaded carbon fuel are analyzed and the advantage of Ca-loaded carbon for DC-SOFCs is demonstrated in detail.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
