A High-Performance 3-D Imaging Technique Using Simultaneous Azimuth and Elevation Compounding.

Abstract

A new technique for 3-D imaging with a row-column array (RCA) configuration has been developed. The technique requires an electrostrictive piezoelectric for the active substrate. While the top set of electrodes is connected to RF transmit and receive channels for conventional diverging wave imaging (DWI), the orthogonal bottom set of electrodes is connected to independently controlled variable dc bias channels. By implementing modulated bias patterns compounded across multiple pulses, fine delay control across the bottom elements can be achieved simultaneously with imaging with the top set of electrodes. This resulted in a high-quality two-way focus in both azimuth and elevation. A 20-MHz electrostrictive composite substrate was fabricated, and 64 top ×64 bottom electrodes were patterned and connected to custom beamforming and biasing electronics. The point spread functions were generated in all dimensions, and the -6 dB resolution was measured to be 93 [Formula: see text] axially, [Formula: see text] in the azimuth, and 328 [Formula: see text] in the elevation dimension. This was in good agreement with the simulated resolutions of 80, 273, and 280 [Formula: see text], respectively.