Abstract
AbstractA high‐linearity LC‐voltage‐controlled oscillator (LC‐VCO) with combined metal‐oxide semiconductor varactors and bulk‐biased P‐channel metal‐oxide semiconductor varactors in parallel is proposed to reduce the VCO‐gain (KVCO) variation and extend the linear range of the control voltage. Fabricated in a 180‐nm complementary metal‐oxide semiconductor process, the proposed topology achieves a low gain variation of less than 6.3% and a tuning range of ~28% operating from 2.31 to 3.06 GHz, corresponding to a linear control voltage range from 0.6 to 1.4 V. The phase noise is measured to be −115.3 dBc/Hz at 1 MHz offset at 3.06 GHz and the figure of merit (FoM) is −181.2 dBc/Hz. The oscillator occupies an area of 0.93 × 0.54 mm and consumes 1.8 mW from mixed 1.2/1.8 V supply voltage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.