Abstract
This paper describes a magnetic component structure that features both low profile and the ability to achieve very high power and energy densities. A key characteristic which enables reaching both of these objectives is the incorporation of a foil winding with a high packing density and a unique shape factor, which enhances thermal and electromagnetic performances simultaneously. Although implementation of foil windings is common practice in magnetic component design, vertically wound foils to achieve low profile is not. Three prototype inductors are compared to a conventional litz-wound E-core inductor. Power dissipation and temperatures are measured in several different experimental procedures. At 140 kHz a power density of 1.8 kVA/in/sup 3/ was achieved for a measured efficiency of 99.5% and a steady-state hot spot temperature rise above the ambient of only 55/spl deg/C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.