Abstract
An organic adhesive for joining Al2O3 ceramics was prepared by using a precursor as a matrix, with B4C and SiO2 additives. The resulting adhesive was characterised by a shear strength test, thermogravimetry-differential scanning calorimetry (TG-DSC), Fourier transform-infrared (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses. The bonded Al2O3 joints were found to exhibit high shear strengths (over 10MPa) after heat treatment at a temperature of 200°C to 1200°C in either an air or Ar atmosphere. In an argon atmosphere, the B4C and SiO2 act as inert fillers. The satisfactory bonding strengths of the Al2O3 joints mainly result from the outstanding adhesive properties of the precursor matrix. In air, the B4C is converted to B2O3 above 500°C and reacts with SiO2 to form a borosilicate phase. The formation of B2O3 and borosilicate glass reduces the volume shrinkage of the adhesive, improves the densification of the bonding layer and enhances the interface joining force, which we believe are responsible for the high shear strengths of the Al2O3 joints (over 40MPa). The high strength and high-temperature resistance enable the application of the adhesive to the joining of ceramic materials for practical applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
