A hardening load transfer function for rock bolts and its calibration using distributed fiber optic sensing

Abstract

Confinement of rock bolts by the surrounding rock formation has long been recognized as a positive contributor to the pull-out behavior, yet only a few experimental works and analytical models have been reported, most of which are based on the global rock bolt response evaluated in pull-out tests. This paper presents a laboratory experimental setup aiming to capture the rock formation effect, while using distributed fiber optic sensing to quantify the effect of the confinement and the reinforcement pull-out behavior on a more local level. It is shown that the behavior along the sample itself varies, with certain points exhibiting stress drops with crack formation. Some edge effects related to the kinematic freedom of the grout to dilate are also observed. Regardless, it was found that the mid-level response is quite similar to the average response along the sample. The ability to characterize the variation of the response along the sample is one of the many advantages high-resolution fiber optic sensing allows in such investigations. The paper also offers a plasticity-based hardening load transfer function, representing a "slice" of the anchor. The paper describes in detail the development of the model and the calibration/determination of its parameters. The suggested model captures well the coupled behavior in which the pull-out process leads to an increase in the confining stress due to dilative behavior.