Abstract
Grouting is a common method for reducing water inflow in tunneling projects in hard rock. A good grouting design should be adapted to the water-bearing fracture system in the rock mass. The aim of this work is to present a case study using relevant parameters, to suggest a combination of tests to provide them, and to show how a conceptual model of the water-bearing fracture system can be chosen based on them. The case study, to which the proposed methodology has been applied, is a section of the TASS tunnel at 450m depth in crystalline rock in Äspö Hard Rock Laboratory in Sweden. In this tunnel project an extensive number of tests provided a fine opportunity for analysis and discussions.A set of functional parameters to describe the rock mass for grouting purposes has been suggested. These are: the hydraulic head h; the hydraulic apertures b of the fractures; fracture frequency P10; the number and orientation of the major fracture sets; and the flow dimension Dq. A set of investigation methods is suggested, aimed at providing the necessary information for high-precision tunnel projects with strict inflow requirements such as the tunnel project studied.Based on these parameters, it is suggested that a conceptual model of the water-bearing fracture system in the rock mass should be chosen. It is shown how this was done in the case study, first in the investigation stage and then an update in the construction stage. Possible ways to adapt the grouting design to the conceptual model are suggested. Selective grouting may be considered for a rock mass with a 2D fracture system, one dominating water-bearing fracture set, when the tunnel orientation is close to perpendicular to this set. For rock mass with a 3D fracture system, two or more water-bearing fracture sets, systematic grouting may be preferable to avoid “moving the water leakage” from one tunnel section to a neighboring section. When the tunnel intersects a fracture zone the focus should be on sealing this zone.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
