Abstract
In this study, a green approach to prepare both porous and dense antifouling membranes was developed through solvent-free bulk polymerization of the casting solution containing 2-hydroxyethyl methacrylate (HEMA) and pre-dispersed silica nanoparticles in two glass sheets under pressure. Porous polyHEMA membranes were prepared via removing the silica nanoparticles embedded in the polymer matrix. Dense poly(HEMA/MAA)/SiO2 membranes were fabricated by adding methacrylic acid (MAA) as co-monomer without removing the silica nanoparticles. Membrane thickness could be conveniently controlled by varying the distance between the two slide glasses. Field emission scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and water contact angle measurement were employed to characterize the morphology and surface chemical composition of the resultant membranes. The porous polyHEMA membranes exhibited high efficiency in purification of bovine serum albumin (BSA) from BSA/yeast solution while the dense poly(HEMA/MAA)/SiO2 membranes exhibited high rejection of orange GII. Both porous membranes and dense membranes exhibited strong hydrophilicity as a result of hydrophilic monomer HEMA, leading to good antifouling properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
