Abstract
A green and environmental friendly method with simple sequential injection spectrophotometry using natural reagent extract from pumpkin (Cucurbita moschata Decne) for determination of benzoyl peroxide (BPO) was developed. The maximum absorption of the yellow crude extract containing the β-carotene compound occurred at a wavelength of 450nm. The yellow extract solution was bleached by BPO to change the color to a colorless solution. The optimum conditions of the proposed method, such as extraction solvent influence of pH, dilution of pumpkin extracts solution, aspiration volume of reagent and sample, flow reversal, incubation time, mixing coil length, and dispensing flow rate were studied and optimized. The linear calibration graph under the optimum conditions in the range of 9.4−100mgL−1 BPO was obtained with good linearity (r2=9985). The limit of detection (LOD) and the limit of quantification (LOQ) were 3.9 and 9.4mgL−1, respectively. Relative standard deviation was achieved at less than 4% (n=7). This system provided sample throughput of 9h−1. Good recoveries were found between 83.42±3.34–112.29±3.49%. The system was successfully employed as a natural reagent extract from pumpkin for determination of BPO in acne treatment samples. Also, the results agreed well with those obtained from the HPLC-UV method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.