Abstract
A steady state geochemical model has been developed to assist in understanding surface-catalysed oxidation of aqueous Fe(II) by O 2(aq), which occurs rapidly at circumneutral pH. The model has been applied to assess the possible abiotic removal of Fe(II)(aq) from alkaline ferruginous mine water discharges using engineered reactors with high specific-surface area filter media. The model includes solution and surface speciation equilibrium, oxidation kinetics of dissolved and adsorbed Fe(II) species and mass transfer of O 2(g). Limited field data for such treatment of a mine water discharge were available for model development and assessment of possible parameter values. Model results indicate that an adsorption capacity between 10 −6 and 10 −5 mol l −1 is sufficient for complete removal, by oxidation, of the Fe(II)(aq) load at the discharge. This capacity corresponds approximately to that afforded by surface precipitation of Fe(III) oxide onto plastic trickling filter media typically used for biological treatment of wastewater. Extrapolated literature values for microbial oxidation of Fe(II)(aq) by neutrophilic microbial populations to the simulated reactor conditions suggested that the microbially-mediated rate may be several orders-of-magnitude slower than the surface-catalysed oxidation. Application of the model across a range of mine water discharge qualities shows that high Fe(II)(aq) loadings can be removed if the discharge is sufficiently alkaline. Additional reactor simulations indicate that reactor efficiency decreases dramatically with pH in the near acid region, coinciding with the adsorption edge for Fe 2+ on Fe oxyhydroxide. Alkaline discharges thus buffer pH within the range where Fe(II)(aq) adsorbs onto the accreting Fe hydroxide mineral surface, and undergoes rapid catalytic oxidation. The results suggest that the proposed treatment technology may be appropriate for highly ferruginous alkaline discharges, typically associated with abandoned deep coal mines.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.