A Genetic Algorithm Optimized ANN for Prediction of Exergy and Energy Analysis Parameters of a Diesel Engine Different Fueled Blends

Abstract

In this research, a hybrid artificial neural network (ANN) optimized by a genetic algorithm (GA) was used to estimate energy and exergy analyses parameters. This article presents an approach for estimating energy and exergy analyses parameters with optimized ANN model based on GA (GA-ANN) for different ternary blends consisting of diesel, biodiesel and bioethanol in a single-cylinder, water-cooled diesel engine. The data used in the experiments performed at twelve different engine speeds between 1000 and 3000 rpm with 200 rpm intervals for five different fuel mixtures consisting of fuel mixtures prepared by blends biodiesel, diesel and 5% bioethanol in different volumes constitute the input data of the models. Using these input data, engine torque (ET), amount of fuel consumed depending on fuels and speed (AFC), carbon monoxide emission values (CO), carbon dioxide emission values (CO2), hydrocarbon emission values (HC), nitrogen oxides emission values (NOx), the amount of air consumed (AAC), exhaust gas temperatures (EGT) and engine coolant temperatures (ECT) were estimated with the GA-ANN. In examining the results obtained were examined, it was proved that diesel, biodiesel and bioethanol blends were effective in predicting all the results mentioned in engine studies performed at 200 rpm intervals in the 1000-3000 rpm range. A standard ANN model used in the literature was also proposed to measure the prediction performance of GA-ANN model. The predictive results of both models were compared using various performance indices. As a result, it was revealed that the proposed GA-ANN model reached higher accuracy in estimating the exergy and energy analyses parameters of the diesel engine compared to the standard ANN technique.