A generic approach for steel containment vessel success criteria for severe accident loads

Abstract

Safety has been defined as the foremost design criterion for the Heavy Water New Production Reactor (NPR-HWR) by the U.S. Department of Energy (DOE), Office of New Production Reactors (NP). The DOE-NP issued the Deterministic Severe Accident Criteria (DSAC) concept to guide the design of the NPR-HWR containment for resistance to severe accidents. The DSAC concept provides for a generic approach for containment vessel success criteria to predict the threshold of containment failure under severe accident loads. This concept consists of two parts: (1) Problem Statements and (2) Success Criteria. This paper is limited to a discussion of a generic approach for steel containment vessel success criteria. These criteria define acceptable containment response measures and limits for each problem statement. The criteria are based on the “best estimate” of failure with no conservatism. Rather, conservatism, if required, is to be provided in the problem statements prepared by the designer and/or the regulatory authorities. The success criteria are presented on a multi-tiered basis for static pressure and temperature loadings, dynamic loadings, and missiles that may impact the containment. Within the static pressure and temperature loadings and the dynamic loadings, the criteria are separated into elastic analysis success criteria and inelastic analysis success criteria. Each of these areas, in turn, defines limits on either the stress or strain measures as well as on measures for buckling and displacements. The rationale upon which these criteria are based is contained in referenced documents. Rigorous validation of the criteria by comparison with results from analytical or experimental programs and application of the criteria to a containment design remain as future tasks.