Abstract
Viscosities of shoshonitic and latitic melts, relevant to the Campi Flegrei caldera magmas, have been experimentally determined at atmospheric pressure and 0.5 GPa, temperatures between 840 K and 1870 K, and H 2O contents from 0.02 to 3.30 wt.%. The concentric cylinder technique was employed at atmospheric pressure to determine viscosity of nominally anhydrous melts in the viscosity range of 10 1.5 − 10 3 Pa s. The micropenetration technique was used to determine the viscosity of hydrous and anhydrous melts at atmospheric pressure in the high viscosity range (10 10 Pa s). Falling sphere experiments were performed at 0.5 GPa in the low viscosity range (from 10 0.35 to 10 2.79 Pa s) in order to obtain viscosity data of anhydrous and hydrous melts. The combination of data obtained from the three different techniques adopted permits a general description of viscosity as a function of temperature and water content using the following modified VFT equation: l o g η = − a + b T − c + d T − e ⋅ e x p g ⋅ w T where η is the viscosity in Pa·s, T the temperature in K, w the H 2O content in wt.%, and a, b, c, d, e, and g are the VFT parameters. This model reproduces the experimental data (95 measurements) with a 1σ standard deviation of 0.19 and 0.22 log units for shoshonite and latite, respectively. The proposed model has been applied also to a more evolved composition (trachyte) from the same area in order to create a general model applicable to the whole compositional range of Campi Flegrei products. Moreover, speed data have been used to constrain the ascent velocity of latitic, shoshonitic, and trachytic melts within dikes. Using petrological data and volcanological information (geometrical parameters of the eruptive fissure and depth of magma storage), we estimate a time scale for the ascent of melt from 9 km to 4 km depth (where deep and shallow reservoirs, respectively, are located) in the order of few minutes. Such a rapid ascent should be taken into account for the hazard assessment in the Campi Flegrei area.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.