Abstract
Measurement of ground contact forces (GCFs) provides necessary information to detect human gait phases. In this paper, a new analysis method of the GCF signals is discussed for detection of the gait phases. Human gaits are complicated, and the gait phases cannot be exactly distinguished by comparing sensor outputs to a threshold. This paper proposes a method by fuzzy logic for detecting the gait phases continuously and smoothly. The smooth and continuous detection of the gait phases enables a full use of information obtained from GCF sensors. For advanced rehabilitation systems, this paper also introduces a higher level algorithm that quantitatively monitors the amount of abnormalities in a human gait. The abnormalities detected by the proposed method include an improper GCF pattern as well as an incorrect sequence of the gait phases. To realize the monitoring algorithm, the gait phases are analyzed as a vector and the abnormalities are detected by simple kinematic equations. The proposed methods are implemented by using signals from sensor-embedded shoes called smart shoes. Each smart shoe has four GCF sensors installed between the cushion pad and the sole. The GCF sensor applies an air pressure sensor connected to an air bladder. A gait monitoring system that integrates the proposed methods is shown in this paper and verified for both normal and abnormal gaits.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.