Abstract
A fully monolithic coupled differential Voltage-Controlled-Oscillators (VCOs) network for phased-array applications is presented in this paper. The proposed integrated VCO array is implemented on a 0.25 µm BiCMOS SiGe process and is made of four LC-NMOS differential VCOs coupled through a resistive network. At 2.5 V power supply voltage and a power dissipation of 125 mW, the coupled VCO array features a measured best case phase noise of ?106 dBc/Hz and ?126.6 dBc/Hz at 100 kHz and 1 MHz frequency offset respectively from a 5.8 GHz carrier. Furthermore, thanks to the differential operation of the array, a continuously controlled phase shifting range from ?46.6° to +49.2° and from ?133.4° to +130.8° is obtained. This constant phase progression is established by detuning the end elements of the array by equal amounts but in opposite directions while maintaining a constant synchronization frequency. Hence, the proposed coupled VCO array is very attractive for use in phased-array applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
