Abstract
AbstractA fully continuous lab scale supercritical fluid extraction system has been designed, built and tested. The system continuously pumps carbon dioxide under supercritical conditions and soil slurry into a counter‐current contacting column. Delhi Loamy Sand, spiked with approximately 10 mg/g of naphthalene, was used as the testing soil. The soil slurry ranged from 0.0028 g dry soil per g slurry to 0.072 g/g. The operating temperature was 43°C and the operating pressure was 7.7 MPa. Near steady state, fully continuous flow was achieved with runs lasting as long as 2 h. All carbon dioxide samples contained measurable quantities of naphthalene and the measured mass transfer coefficients were as high as 4.6×10−4 s−1.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
