A framework for risk assessment of groundwater contamination integrating hydrochemical, hydrogeological, and electrical resistivity tomography method.

Abstract

Groundwater contamination have been widely concerned. To reliably conduct risk assessment, it is essential to accurately delineate the contaminant distribution and hydrogeological condition. Electrical resistivity tomography (ERT) has become a powerful tool because of its high sensitivity to hydrochemical parameters, as well as its advantages of non-invasiveness, spatial continuity, and cost-effectiveness. However, it is still difficult to integrate hydrochemical, hydrogeological, and ERT datasets for risk assessment. In this study, we develop a general framework for risk assessment by sequentially jointing hydrochemical, hydrogeological, and ERT surveys, while establishing petrophysical relationships among these data. This framework can be used in groundwater-contaminated site and help to delineate the distribution of contaminants. In this study, it was applied to a nitrogen-contaminated site where field ERT survey and borehole information provided valuable measurement data for validating the consistency of contamination and hydrogeological condition. Risk assessment was conducted based on the refined results by the establishment of relationship between conductivity and contaminants concentration with . The contamination source was identified and the transport direction was predicted with the good agreement of = 0.965 between simulated and observed groundwater head, which can help to propose measures for anti-seepage and monitoring. This study thus enhances the reliability of risk assessment and prediction through a thought-provoking innovation in the realm of groundwater environmental assessment.