Abstract
Ultrasound (US) has been increasingly used as medical imaging technology across various clinical diagnostic and therapeutic scenarios thanks to its availability and non-radiative nature. While 3D US probes are becoming available, most systems are still using 2D probes. For 3D US reconstruction based on 2D probes, US image calibration forms an essential step. Through calibration, one can find the transformation matrix between a coordinate frame attached to an optical marker or the robot’s end effector towards the coordinate frame of the US probe. Current US calibration methods usually require hereto lengthy free hand gestures as well as some manual interventions, which hampers the use and integration with advanced robotic systems. This paper introduces a reliable automatic calibration framework that is also fast. Demonstrated on a KUKA lightweight robot and 2D US probe, the full calibration procedure was completed in 224.8 seconds with a 1.29 mm mean 3D localization error. Within this procedure, camera-to-robot calibration was accomplished within only 47 seconds and reached a 0.17 mm mean error. Validation of the US image calibration was done through 3D printed model, leading to a mean deviation of 1.05 mm from the respective CAD models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.