Abstract
A four green transverse magnetic (TM)/red transverse electric (TE) light wavelength demultiplexer device, based on multi slot-waveguide (SW) structures is demonstrated. The device aims to demultiplex wavelengths in the green/red light range with wavelengths of 530, 540, 550, and 560 nm; 630, 640, 650, and 660 nm. This means that the device functions as a 1 × 4 demultiplexer for each polarization mode (TE/TM). The controlling of the light switching between two closer segment SWs under the TM/TE polarization mode was studied by designing a suitable SW structure and setting the right segment length to fit the coupling lengths of the operating wavelengths. The device is composed of six-segment SW units and six S-bends (SB) SW. The key SW and SB parameters were optimized and determined by a full vectorial beam propagation method (FV-BPM). Results show power losses better than 0.138 dB, crosstalk better than −21.14 dB, and an optical spectrum smaller than 9.39 nm, with an overall compact size of 104.5 µm. The device can be integrated in wavelength division multiplexing (WDM) for increasing data bit rate in a visible light communication (VLC) system.
Highlights
The fundamental of wavelength division multiplexing (WDM) lies in the ability to send different data types over waveguide networks in the form of light [1]
The device can be integrated in wavelength division multiplexing (WDM) for increasing data bit rate in a visible light communication (VLC) system
Former works, which studied demultiplexers based on SW in multi-mode interference (MMI) structures operating within the visible spectrum and in the C band, show a good performance and an overall size device as long as 700 μm and up to several millimeters [2,18]
Summary
The fundamental of wavelength division multiplexing (WDM) lies in the ability to send different data types over waveguide networks in the form of light [1]. Former works, which studied demultiplexers based on SW in MMI structures operating within the visible spectrum and in the C band, show a good performance and an overall size device as long as 700 μm and up to several millimeters [2,18]. This technology cannot be implemented to design a demultiplexer device that can work on both polarization mode TM and TE. A full vectorial beam propagation method (FV-BPM), under a TM/TE polarization mode, was used to analyze and optimize the key geometrical parameters of the six segment SW and SB units
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
