Abstract
The electrolytic capacitor is the key component that limits the operating lifetime of LED drivers. If an ac–dc LED driver with power factor correction (PFC) control is allowed to output a pulsating current for driving the LEDs, the electrolytic capacitor will no longer be required. However, this pulsating current will introduce light flicker that varies at twice the power line frequency. In this paper, a configuration of flicker-free electrolytic capacitor-less single-phase ac–dc driver for LED lighting is proposed. The configuration comprises an electrolytic capacitor-less PFC converter and a bidirectional converter, which serves to absorb the ac component of the pulsating current of the PFC converter, leaving only a dc component to drive the LEDs. The output filter capacitor of the bidirectional converter is intentionally designed to have a large voltage ripple, thus its capacitance can be greatly reduced. Consequently, film capacitors can be used instead of electrolytic capacitors, leading to the realization of a flicker-free ac–dc LED driver that has a long lifetime. The proposed solution is generally applicable to all single-phase PFC converters. A prototype with 48-V, 0.7-A output is constructed and tested. Experimental results are presented to verify the effectiveness of the flick-free electrolytic capacitor-less ac–dc LED driver.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
