A Flexible and Mechanical Robust All-Solid-State Polymer Electrolyte with Microphase Separated Structure for Lithium-Ion Battery.

Abstract

Polyethylene oxide (PEO)-based electrolytes are the most widely used solid polymer electrolyte (SPE) due to their high safety, excellent ability to dissociate lithium salts, low cost, and ease of preparation. However, low ionic conductivity and narrow electrochemical stability window limit their potential for further development. "Polymer-in-salt" electrolytes exhibit superior electrochemical performance; however, the high lithium salt concentration makes the SPE mechanically fragile when facing lithium dendrites. Therefore, preparing an SPE that can withstand a high concentration of lithium salt while still maintaining good mechanical properties has become a valuable challenge. In this study, a macroscopically homogeneous but nanoscopically phase-separated polymer matrix was designed as an electrolyte that can withstand a high concentration of lithium salt while retaining good mechanical properties, and this study investigated changes in the Li+ solvation structure within the electrolyte and analyzed the reasons for the simultaneous achievement of good ionic conductivity (1.02 × 10-3 S cm-1 at 60 °C) and mechanical properties (7 MPa at room temperature). The formation of large ion clusters at the phase interface and selective enrichment of lithium salt in specific regions are found to play crucial roles, and the critical current density (CCD) can reach a value of 2.2 mA cm-2. This work demonstrates a promising design approach for polymer electrolytes that achieves an optimal balance between SPE conductivity and mechanical properties through microstructure control.