A Flat Heat Pipe Architecture Based on Nanostructured Titania

Abstract

A novel 3 cm × 3 cm × 600 μm-thick Ti-based flat heat pipe is developed for Thermal Ground Plane (TGP) applications. The Ti-based heat pipe architecture is constructed by laser welding two microfabricated titanium substrates to form a hermetically sealed vapor chamber. The scalable heat pipes' flat geometry facilitates contact with planar heat sources, such as microprocessor chip surfaces, thereby reducing thermal contact resistance and improving system packaging. Fluid transport is driven by the wicking structure in the TGP, which consists of an array of Ti pillars that are microfabricated from a titanium substrate using recently developed high-aspect-ratio Ti processing techniques. The hydrophilic nature of the Ti pillars is increased further by growing ~200-nm hairlike nanostructured titania of the pillar surfaces. The resulting super hydrophilic wick offers the potential to generate high wicking velocities of ~27.5 mm/s over distances of 2 mm. The experimental wetting results show a diffusive spreading behavior that is predicted by Washburn dynamics. The maximum effective thermal conductivity of a heat pipe is directly related to the speed of capillary flow of the working fluid through the wick and is measured experimentally in the first-generation device to be k = 350 W/m · K. A dummy TGP with a cavity volume of ~170 μL was used to test the hermiticity level of the laser packaging technique. The device gave a 0.067% of water loss based on ~60 μL of charged water at 100°C in air for over a year.