Abstract
The venting event of thermal runaway has attracted public attention due to safety issues aroused by frequent fire accidents of new energy vehicles. However, the quantitative description of venting behavior is incomplete for tests in a sealed chamber due to the initial violent injection. In this study, nine types of batteries covering 28 cases in total were employed to investigate the influence of energy density, ambient temperature, pressure, and SOC on the venting behavior, characterized by normalized gas amount; maximum gas releasing rate; and venting durations t50, t90, t95, and t99. Then, a ‘two-point’ fitting method was proposed to modify outcomes concerning real-time gas amounts. The results show that at 100% SOC, the normalized gas amount ranges within 0.075–0.105 mol/Ah for NCM batteries and 0.025–0.035 mol/L for LFP batteries, while the maximum gas releasing rate presents a strongly positive correlation with the capacity of NCM batteries (0.04–0.31 mol/s) and a slight increase for LFP batteries (0.02–0.06 mol/s). Eventually, the three venting patterns were summarized and advanced according to the energy density and SOC of the targeted battery. This research can provide a reference for risk evaluations of the venting process and safety design for structure and pressure relief in battery systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.