Abstract

A new pre-supporting technology named the freeze-sealing pipe roof (FSPR) method was adopted in the construction of Gongbei tunnel (Zhuhai, China), a critical part of the Hong Kong–Zhuhai–Macau bridge (HZMB) project. The method combined pipe-roofing with artificial ground freezing (AGF). The pipe roof which included a number of large-diameter steel pipes was designed to play a primary role in load bearing, while the frozen wall between pipes was designed for water sealing. The refrigeration proceeded in two stages called the active freezing period and excavation period. This paper mainly focuses on the freezing characteristics of FSPR to explore how the frozen soil wall developed and changed over time during both periods based on field temperature data. The results show that the development of the frozen wall met the design requirements in fewer than 80 days of refrigeration considering the most unfavorable situation. The distribution of frozen soil along the entire tunnel was non-uniform. Frost heave and thaw weakening problems should be taken into account, since some of the bottom section of the frozen wall was more than 3 m. The frozen soil at the excavation side was visibly influenced by the replenishment of heat due to excavation, while the frozen soil outside the excavation face was much less influenced. The thermal effects of Hurricane Nicole on the frozen soil wall was also observed. The conclusions provide experience, reference, and guidance for the development of similar projects in the future.

Highlights

  • The pipe-roofing method is widely used in geotechnical engineering [1,2,3,4,5] since its appearance in Japan in 1971 [6]

  • The freezing effect of the freeze-sealing pipe roof (FSPR) adopted in the construction of Gongbei tunnel was analyzed in this paper based on the field temperature data

  • The results showed that FSPR maintained satisfactory water resistance performance during both the positive freezing period and excavation period

Read more

Summary

Introduction

The pipe-roofing method is widely used in geotechnical engineering [1,2,3,4,5] since its appearance in Japan in 1971 [6]. This method is a kind of pre-supporting technology that can effectively control the disturbance of tunnel excavation, especially in shallow buried tunnel construction. Considering the complex geological conditions in the excavation area, such as water-rich strata and stagger distribution of soft sandy and silty clay, the above conventional method using a pipe lock is unable to ensure the water sealing.

Methods
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call