A field investigation on the distribution characteristics of structure cracks in the Chengchao Iron Mine, China

Abstract

In this study, a comprehensive assessment on the generation mechanism, distribution characteristics, and extension rules of structure cracks was conducted by in situ monitoring and field investigation in the Chengchao Iron Mine. Structure cracks are affected by many factors, e.g., surface deformation, structure strength, occurrence position, and machine vibration. They initially occur in a structure when the strength of the structure is not enough to resist the inner strain as surface deformation increases. In contrast, increases in width and length of structure crack exert stress release in the structure and thus decrease structure deformation surrounding the crack. A great ground crack may adversely aggravate structure cracking and release the stress of surrounding rock masses. In addition, micro cracks in rock masses provide favorable conditions for the generation and extension of cracks, resulting that cracks occur in shaft walls more easily and extend towards the deeper. The initial distribution of cracks is generally consistent with such micro cracks. Subsequently, cracks in deep rock masses will extend along the strike of the mined-out area as surface deformation increases. Sensibilities to cracking of structures are changed by their different strain resistances and become stronger from bolt-shotcrete shaft, bolt-shotcrete tunnel, and brick-concrete building to brick wall. Based on distribution characteristics of cracks and wave velocity in rock masses, the overlaying strata affected by underground mining can be divided into four zones: broken zone, broken transition zone, crack generation zone, and micro deformation zone.