Abstract
Induction motors (IM) are the most frequently used type of motor in the industry. The number of rotor slots, bar geometry, and conductivity of bar material have a strong impact on the torque profile and efficiency characteristics of induction motors. This study focused on investigating the effect of different rotor bar designs on motor performance by the finite element method (FEM). The IMs have been designed using the same stator core, winding, and core lengths. The total rotor bar cross-section areas are also fixed throughout all designs. In addition to the change in the number of rotor bars and geometry, the effect of copper and aluminum bar materials on motor performance was also investigated, both for single and double-layered squirrel-cage structures. The results of the study indicate that the starting torque of the motor in a 36/30-slot aluminum single-cage structure was obtained as 96.26 Nm, while the starting torque of a 36/46-slot aluminum double-cage structure was found to be 115.34 Nm. It is also found that the starting torque of the initial design can be increased by up to 19.82% by changing only the rotor bar numbers and material with the same stator and rotor size. The efficiency of the motors was determined as 86.6% for both designs. In addition to efficiency, the output torque ripple has been decreased to 2.63, which equals a 67.32% decrease in the ripple of the initial design. The improved design has an approximately 8 °C lower T2 due to better cooling performance as a result of a higher number of rotor slots.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.