Abstract
In the context of the assembly of large aeronautical structures, the flexibility of the parts often leads to the nonconformity of the assembly or, at least, requires additional time-consuming operations. In order to deal with this problem, one must take this flexibility into account during the tolerancing process.Investigations of a non-rigid-body tolerancing process have shown that a robust model is necessary in order to achieve satisfactory predictability. It was also found that the finite element model used, based on a simplified geometry, was not accurate enough. The approach proposed in this paper to obtain an accurate tolerancing process consists in updating the stiffness and mass properties of the FE model based on measurements taken on the assembly line during the assembly process. The objective is to take these measurements using only tools which are available on the chain (such as manipulation or control tools). This implies that only static strength and displacement information can be used. This is achieved through a clever measurement methodology and a model updating method based on the constitutive relation error.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have