Abstract
Fatigue crack propagation for copper/epoxy molding compound interfaces is modeled in this work by conducting cyclic loading on double cantilever beam test specimens. The continued increase in mechanical compliance of test specimens as the crack propagates through hundreds of cycles is used to determine the crack length and thus, the crack growth rate per cycle which is used to determine the Paris’ law constants as a function of strain energy release rate range. When monotonic debonding testing is conducted, it is seen that the critical strain energy release rate initially increases with the crack length and then stabilizes demonstrating the increasing resistance for the epoxy/copper interface. When such an increasing R-curve is used to normalize the strain energy release rate range, it is observed that the Paris’ law constants can be determined with good consistency for a wide range of specimens over different crack lengths.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
