A fast response superconducting thin-film probe for detection of second-sound shock waves in superfluid helium

Abstract

Fast response probes are needed for studying the formation and propagation of second-sound shock waves (and for applying such waves to special measuring purposes) in superfluid helium. Newly developed superconducting thin-film probes enable shock-front rise times of down to 0.3 μs to be detected at signal-to-noise ratios higher than about 100. Using high vacuum evaporation techniques, such probes are relatively easy to produce. Their main body consists of a cylindrical quartz glass rod 1.5 mm in diameter with one end face polished to a plane of optical quality. The sensor strip is deposited onto this plane face as a two-component film of 0.02 mm width and 1 mm length. The temperature variations due to second sound cause changes in the resistance of the film and thus, at constant bias current, variations of the voltage drop across it. The temperature where the film undergoes its steep transition to superconductance and where, therefore, the probe works at its greatest sensitivity, is primarily fixed by the ratio of the two components (tin and gold) of the film, but can be adjusted to special values via the magnetic field produced by the adjustable bias current. The high resolution in time which is achievable by this probe makes it useful for accurate measurement of even small variations of the running time of second-sound shock waves. Such variations may be caused by flows, as is shown in the case of a flow produced by a rotating vane; their measurement may, therefore, serve as a tool for flow investigation.